|
|
|||||||||||||||||
詳細介紹
產品概述
電動穿透式刀型閘閥也叫氣動穿透式刀閘閥通過配用電磁閥、接近開關等附件可以完成開、關兩位置的動作控制和信號輸出，也可以完成連續動作的自動控制。
穿透式刀型閘閥優點在于閥體通徑無凹槽，介質不會卡阻堵塞，并且具有全通徑流通特性閥，腔不積渣,特別適合于漿體輸送及粉體物粒的輸送。
技術參數范圍
設計制造: JB/T8691-1998
結構長度: GB/T15188.2-94
法蘭連接: GB/T9113.1-2000 JB/T79-94
試驗驗收: GB/T13927-92
Product introduction
Long stem flat gate valve with electromagnetic valve, close to switch, etc, can complete the action of two position control and signal output, also can complete automatic control of continuous motion.
Long stem flat gate valve without grooves, advantage is that the body size medium will not jam congestion, and with all-pass runoff flux valve features, cavity not slag deposition, particularly suitable for slurry transportation and powder materials.
Technical Parameter Range
Design and manufacture: JB/T8691-1998
Structural length: GB/T15188.2-94
Flange connection: GB/T9113.1-2000 JB/T79-94
Testing and acceptance: GB/T13927-92
主要零部件材質 Key parts material
主要性能規范 Key performance indicators
注：0.6MPa、1.0MPa、1.6MPa及美標150Lb等連接尺寸見附錄。
Note:see the appendix for connection dimensions of 0.6MPa,1.0MPa,1.6MPa,American Standard 150Lb,etc.
電動穿透式刀型閘閥也叫氣動穿透式刀閘閥通過配用電磁閥、接近開關等附件可以完成開、關兩位置的動作控制和信號輸出，也可以完成連續動作的自動控制。
穿透式刀型閘閥優點在于閥體通徑無凹槽，介質不會卡阻堵塞，并且具有全通徑流通特性閥，腔不積渣,特別適合于漿體輸送及粉體物粒的輸送。
技術參數范圍
設計制造: JB/T8691-1998
結構長度: GB/T15188.2-94
法蘭連接: GB/T9113.1-2000 JB/T79-94
試驗驗收: GB/T13927-92
Product introduction
Long stem flat gate valve with electromagnetic valve, close to switch, etc, can complete the action of two position control and signal output, also can complete automatic control of continuous motion.
Long stem flat gate valve without grooves, advantage is that the body size medium will not jam congestion, and with all-pass runoff flux valve features, cavity not slag deposition, particularly suitable for slurry transportation and powder materials.
Technical Parameter Range
Design and manufacture: JB/T8691-1998
Structural length: GB/T15188.2-94
Flange connection: GB/T9113.1-2000 JB/T79-94
Testing and acceptance: GB/T13927-92
主要零部件材質 Key parts material
| 閥體、上蓋Valve body, upper cap | 碳鋼、不銹鋼Carbon steel, stainless steel |
| 閥板Valve plate | 不銹鋼stainless steel |
| 閥桿Stem | 不銹鋼stainless steel |
| 密封圈Seal ring | 四氟、橡膠PTFE,Rubber |
| 公稱壓力Nominal pressure | PN |
| 殼體試驗Casing test | 1.5XPN |
| 密封試驗Leak test | 1.1XPN |
| 工作溫度Operating temperature |
橡膠≤80℃ 四氟密封≤180℃ Rubber ≤80℃，PTFE≤180℃ |
| 適用介質Working medium |
干灰、紙漿、**、污水、煤氣粉末顆粒物、渣水混合物等 Dry **per pulp,syrup,sewage,gas,powder,particle,slag-water mix,etc. |
| 主要外形及連接尺寸Profile and connection dimension |
單位Unit:mm
|
|||||||||
| DN | L | H1 | H2 | H3 | D1 | D2 | Do | N-M | P | B |
| 100 | 51 | 405 | 705 | 585 | 180 | 156 | 240 | 8-M16 | 490 | 170 |
| 125 | 57 | 450 | 780 | 665 | 210 | 184 | 260 | 8-M16 | 490 | 190 |
| 150 | 57 | 510 | 810 | 770 | 240 | 211 | 280 | 8-M20 | 490 | 240 |
| 200 | 70 | 615 | 930 | 920 | 295 | 266 | 300 | 12-M20 | 520 | 335 |
| 250 | 70 | 715 | 1080 | 1175 | 355 | 319 | 320 | 12-M24 | 520 | 335 |
| 300 | 76 | 822 | 1140 | 1255 | 410 | 370 | 340 | 12-M24 | 520 | 335 |
| 350 | 76 | 975 | 1290 | 1455 | 470 | 429 | 360 | 16-M24 | 520 | 350 |
| 400 | 89 | 1024 | 1344 | 1559 | 525 | 480 | 400 | 16-M27 | 605 | 390 |
| 450 | 89 | 1235 | 1560 | 1926 | 585 | 548 | 450 | 20-M27 | 605 | 430 |
| 500 | 114 | 1265 | 1610 | 2226 | 650 | 609 | 500 | 20-M30 | 605 | 430 |
Note:see the appendix for connection dimensions of 0.6MPa,1.0MPa,1.6MPa,American Standard 150Lb,etc.
聯系方式
|
